Anti-Graffiti
Graffiti Protection System
The Enhance Anti-Grafitti System is a two step process that combines two highly effective materials to form a protective barrier against penetration by contaminants on brick, block, masonry and concrete surfaces:
 |
 |
 |
STEP 1 requires surface cleaning and preparation, then installation of Enhance EPC-120 a penetrating densifier (for a complete description of EPC-120 see the Enhance Penetrating Coatings literature).
STEP 2 follows with application of REPEL (ESC-0071) when the surface has completely dried, usually 24 hours minimum. When applied REPEL (ESC-0071) and EPC-120 will combine to create a graffiti resistant surface barrier. REPEL (ESC-0071) performs two vital functions. Its primary function is to prevent ingress of liquid contaminants. The secondary benefit is to provide a long lasting yet sacrificial coating. This two part system cures to a clear appearance with no gloss. Graffiti removal and general maintenance are easier. The system is also suitable for architectural and aging structures.
USES:
- As breathable protective coating
- For moisture and freeze-thaw protection
- To limit graffiti damage and costs
- For interior or exterior surfaces
STEP 1 PREPARATION:
Follow instructions for Enhance EPC-120 use.
| Coverage: EPC-120 | |
| Concrete | 150-300 sq ft/gal |
| Masonry | 200-450 sq ft/gal |
| Block | 100-300 sq ft/gal |
STEP 2 APPLICATION:
For best results, allow minimum 24 hours curing time for the EPC-120 treatment. Apply REPEL (ESC-0071) to a clean, dry surface with brush, roller or low pressure airless sprayer. Apply even coats allowing for full surface saturation. Within minutes REPEL (ESC-0071) will start curing and complete the two part Anti-Grafitti System acting as a repellent even to itself.
| Coverage: Repel | |
| Concrete | 150-300 sq ft/gal |
| Masonry | 200-450 sq ft/gal |
| Block | 100-250 sq ft/gal |
PROTECTION FOR COATED SURFACES
REPEL (ESC-0072) is formulated for coated surfaces. When applied REPEL (ESC-0072) will create a moisture repellent and graffiti resistant surface sacrificial barrier. This product cures to a clear architectural appearance with no gloss. Graffiti removal and general maintenance are easier. The REPEL (ESC-0072) product compliments the anti-graffiti system and is also suitable for architectural and aging structures.
| Coverage: Repel - ESC-0072 | |
| All Surfaces | 200-600 sq ft/gal |
PACKAGING
Share
Want to share the current page with your friends? Use this widget to email or post a link to your favorite social network.
Promotions
Would your company like to work with us? Contact Us to learn more about our joint venture program and cross-promotion opportunities.